Yamada pump model:
NDP-80BPS Line size 1 – 3 inch     Application / Process / Fluid:
Acid & Alkaline Liquids    
Country: Italy .  chemical plant producing chemical fertilizers,and they are using the liquid residues of a landfill, leachate from waste, mixed with various acids and alkaline liquids which are used to produce chemical fertilizers.
For transferring this they used centrifugal pumps and a magnetic drive pump.
The technician in charge was not satisfied with the pumps used as often the
mechanical seals would break and the magnetic pumps used for transfer of the chemicals often faced total pump failure in spite of the fact that they used an electric monitoring device to prevent dry running. At the end of the 6 to 7 meters long
discharge line, the line tended to get filled with air, creating large bubbles preventing correct bearing bush lubrication resulting in rapid overheating and as a result the ceramic bushes would break due to thermal shock, sometimes ruining the pump
beyond repair a very costly situation.

Yamada came to the rescue and offered to use for the transfer of 98% H2SO4 our Yamada NDP-50BVT. The two magnetic drive pumps and one mechanical seal pumps were replaced by our Yamada NDP-50BVT and our NDP-25 BVT.
Two NDP-80BPS were purchased for pumping acid water containing foam.

Share on facebook
Share on twitter
Share on linkedin